-
src/sbbs3/putmsg.cpp
From
deuce@VERT to
CVS commit on Wednesday, February 18, 2015 20:12:49
src/sbbs3 putmsg.cpp 1.31 1.32
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv3398
Modified Files:
putmsg.cpp
Log Message:
Now that wordwrap() is fixed, cols-1 is the correct value to pass.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ
telnet://vert.synchro.net
-
From
rswindell@VERT to
CVS commit on Thursday, January 04, 2018 00:33:26
src/sbbs3 putmsg.cpp 1.33 1.34
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv13116
Modified Files:
putmsg.cpp
Log Message:
stop reading file upon Ctrl-Z when CPM_EOF mode flag used
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Wednesday, August 15, 2018 12:38:06
src/sbbs3 putmsg.cpp 1.34 1.35
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv27408
Modified Files:
putmsg.cpp
Log Message:
This is a bit of a hack for Nelgin, who noticed that novice menu mode
would not always auto-redisplay menu files when the user hits 'Q' (or 'N'
or Ctrl-C) at auto-pause prompts:
When displaying a "message" (e.g. file), if the console abort flag is set before a single line has been displayed, clear the abort flag. This most
likely means a pause (hit a key) prompt was automatically displayed due to
a clear screen code in the message/file and the user hit 'Q' or 'N' or
Ctrl-C at the prompt. In this special case, don't treat that as an
"abort message" command and keep displaying the message/file.
Once one or more lines in the message/file have been displayed, then the behavior is the same as before: a console abort (even as a result of an auto-pause prompt key) will stop the display of the current message/file.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Wednesday, October 03, 2018 21:03:53
src/sbbs3 putmsg.cpp 1.35 1.36
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv6325
Modified Files:
putmsg.cpp
Log Message:
Updated some very obsolete comments.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Sunday, October 14, 2018 21:16:35
src/sbbs3 putmsg.cpp 1.37 1.38
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv22404
Modified Files:
putmsg.cpp
Log Message:
@eof@ (all-caps) is now another way to insert a premature EOF marker for a display file.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Monday, October 15, 2018 18:17:25
src/sbbs3 putmsg.cpp 1.38 1.39
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv19954
Modified Files:
putmsg.cpp
Log Message:
If the Ctrl-A" code contains an empty/bogus filename, don't try to display
it. This Ctrl-A code is dubious and perhaps should just be removed.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Thursday, October 25, 2018 19:04:59
src/sbbs3 putmsg.cpp 1.40 1.41
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv10622
Modified Files:
putmsg.cpp
Log Message:
New @-code: WRAPOFF - used to mark the end of a word-wrapped section in a display/menu file.
Also, the WORDWRAP @-code may now appear anywhere in the file and multiple times in the file (to mark multiple word-wrapped blocks of text).
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Friday, December 14, 2018 20:50:03
src/sbbs3 putmsg.cpp 1.42 1.43
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv11590
Modified Files:
putmsg.cpp
Log Message:
Fix bug when the @center@ code when displaying files that contain Unix-style line endings (sole-LF) instead of CR/LF line endings.
Thanks to Mark Lewis (wkitty42) for the bug report!
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Wednesday, July 10, 2019 14:41:38
src/sbbs3 putmsg.cpp 1.50 1.51
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv31168
Modified Files:
putmsg.cpp
Log Message:
Calculate string length *before* the initial parsing of the WORDWRAP/WRAPOFF codes.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Thursday, July 25, 2019 22:23:58
src/sbbs3 putmsg.cpp 1.52 1.53
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv25006
Modified Files:
putmsg.cpp
Log Message:
Ctrl-A" is a potentially dangerous Ctrl-A code, so only support it when
@-codes are also supported (i.e. displaying sysop-controlled content).
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Monday, July 29, 2019 15:38:02
src/sbbs3 putmsg.cpp 1.54 1.55
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv23720
Modified Files:
putmsg.cpp
Log Message:
Strip "ZHEX" ('B') from ZDLE/ZHEX combinations which trigger auto-ZMODEM transfers. These should *not* be included in message text.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Monday, August 05, 2019 04:14:35
src/sbbs3 putmsg.cpp 1.57 1.58
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv23795
Modified Files:
putmsg.cpp
Log Message:
Only restore the previously current output_rate if it was changed in the msg.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Sunday, April 05, 2020 19:49:34
src/sbbs3 putmsg.cpp 1.58 1.59
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv19396
Modified Files:
putmsg.cpp
Log Message:
The hack for Nelgin created back in rev 1.35 (Aug-15-2018) was:
- incomplete, it didn't account for the CLEAR @-code which is only handled here - caused side-effects in that any Baja PRINT function call with a single line
that contained any ^A or @-codes would reset the console abort indication
flag (SS_ABORT).
Observed: hitting Ctrl-C at while executing the yesnobar.bin or noyesbar.bin
would leave "Yes Yes No" on the console, for example.
Solution: use the tos (top-of-screen) state before/after the call to ctrl_a()
or show_atcode() to determine if the reset-abort hack should be applied.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Sunday, May 03, 2020 01:29:00
src/sbbs3 putmsg.cpp 1.60 1.61
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv29188
Modified Files:
putmsg.cpp
Log Message:
After displaying a native PETSCII (.seq) file, reset the character set to Upper/Lower for compatibility with the rest of the BBS (some PETSCII Art files change the character set to Upper/Graphics).
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Friday, May 08, 2020 18:52:41
src/sbbs3 putmsg.cpp 1.63 1.64
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv6598
Modified Files:
putmsg.cpp
Log Message:
non-PETSCII (.seq) display files are assumed to retain their attributes between lines, but PETSCII terminals reset the inverse attribute upon CR's, so restore the attribute if it changes unexpectedly. We could make this check only when outputting CR's (rather than all characters), if it's a problem later.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
Rob Swindell@VERT to
Git commit to sbbs/master on Monday, September 07, 2020 19:03:45
-
From
Rob Swindell@VERT to
Git commit to sbbs/master on Monday, September 07, 2020 20:08:02
-
From
Rob Swindell@VERT to
Git commit to sbbs/master on Thursday, October 08, 2020 20:12:37
https://gitlab.synchro.net/sbbs/sbbs/-/commit/9919c23e8e52f5b7bb9a79f4
Modified Files:
src/sbbs3/putmsg.cpp
Log Message:
Don't pass-through ANSI Device Attributes (DA) requests
putmsg(), used to display messages and display/menu files, will no longer pass-through the ANSI sequence ESC[c (found in some corrupted ANSI posts to fsxNet->FSX_BOT echo) to the client terminal since this will stimulate a (unwanted) response from the client.
I do wonder if the outchar_esc value check should be == here instead of >=, but I'm not familiar with the string and SOS states. I wonder if any display files sent from the BBS would ever include those sequences.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
Hatton@VERT/THRCORN to
Rob Swindell on Friday, October 09, 2020 00:31:00
Rob Swindell wrote to Git commit to sbbs/master <=-
Modified Files:
src/sbbs3/putmsg.cpp
Log Message:
Don't pass-through ANSI Device Attributes (DA) requests
putmsg(), used to display messages and display/menu files, will no
longer pass-through the ANSI sequence ESC[c (found in some corrupted
ANSI posts to fsxNet->FSX_BOT echo) to the client terminal since this
will stimulate a (unwanted) response from the client.
Thank you!
Hatton
... DalekDOS v(overflow): (I)Obey (V)ision impaired (E)xterminate
--- MultiMail/Win v0.52
þ Synchronet þ Three Corners and Beyond!
http://3corners.us
-
From
Digital Man@VERT to
Hatton on Thursday, October 08, 2020 22:18:21
Re: Re: src/sbbs3/putmsg.cpp
By: Hatton to Rob Swindell on Fri Oct 09 2020 12:31 am
Rob Swindell wrote to Git commit to sbbs/master <=-
Modified Files:
src/sbbs3/putmsg.cpp
Log Message:
Don't pass-through ANSI Device Attributes (DA) requests
putmsg(), used to display messages and display/menu files, will no longer pass-through the ANSI sequence ESC[c (found in some corrupted ANSI posts to fsxNet->FSX_BOT echo) to the client terminal since this will stimulate a (unwanted) response from the client.
Thank you!
Sure. There are likely more sequences we might want to filter out of ANSI-encoded messages (or whitelist only the ones we *do* want to pass-through), but this'll work for now.
digital man
Synchronet "Real Fact" #95:
Synchronet v3.15b was released in October of 2011 (5 years after v3.14a). Norco, CA WX: 62.8øF, 84.0% humidity, 3 mph ESE wind, 0.00 inches rain/24hrs
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
Rob Swindell@VERT to
Git commit to sbbs/master on Monday, November 02, 2020 02:30:29
https://gitlab.synchro.net/sbbs/sbbs/-/commit/93dc3f128816d1ddb24b6cab
Modified Files:
src/sbbs3/putmsg.cpp
Log Message:
Allow punctuation characters on either side of the markup tags
So you can do stuff (*like this*).
Also, we don't need to heavily scrutinize the closing tag when we come upon it because we already determined it was valid before we accepted the opening tag/character.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
Rob Swindell@VERT to
Git commit to sbbs/master on Sunday, November 08, 2020 13:15:19
-
From
Rob Swindell@VERT to
Git commit to sbbs/master on Sunday, November 08, 2020 15:57:40
-
From
Rob Swindell@VERT to
Git commit to main/sbbs/master on Sunday, January 23, 2022 01:08:25
https://gitlab.synchro.net/main/sbbs/-/commit/09a32c0dad9f896893f2845b
Modified Files:
src/sbbs3/putmsg.cpp
Log Message:
Basic PETSCII output column/line counting in putmsg()
When printing a PETSCII Sequence (.seq) file, count the lines/rows and columns similar to how we would if we were using outchar() (but we don't, we use the lower-level outcom() to bypass any translations).
This is related to issue #325:
PETSCII seq files seem to display just fine, the problem I saw was with the auto-pausing (e.g. before a screen-clear) after displaying them.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
Rob Swindell@VERT to
Git commit to main/sbbs/master on Sunday, January 23, 2022 12:29:13
-
From
Rob Swindell@VERT to
Git commit to main/sbbs/master on Sunday, January 23, 2022 12:48:34
-
From
Rob Swindell@VERT to
Git commit to main/sbbs/master on Thursday, March 10, 2022 00:24:49
-
From
Rob Swindell (on Debian Linux)@VERT to
Git commit to main/sbbs/master on Sunday, March 12, 2023 17:36:56
-
From
Rob Swindell (in GitKraken)@VERT to
Git commit to main/sbbs/master on Sunday, March 12, 2023 18:24:18
-
From
Rob Swindell (in GitKraken)@VERT to
Git commit to main/sbbs/master on Monday, March 13, 2023 18:31:32