Hi all!

I already have binkit configured as node for several nets. (fido, fsx, micronet, etc) this just work fine.

My fido node are 4:902/26 and also, for testing purpose, i have some
points as downlinks for my fidonet node (ex: 4:902/26.3, 4:902/26.5, etc)

This also works. I can add/remove areas from the "sbbsecho areafix" from
these points and get these packets.

Now, i thinking on receive the 4:900 segment to get downlink
nodes/clients like 4:900/10, 4:900/11, etc. (I think that this setup
called "fidonet hub" mode)

My questing are:

Should I add the 4:900 on scfg->networks->fidonet->system addresses
or must be a node aka like 4:900/0 ?

This is my actual linked nodes:

[ú][?]ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Linked Nodes ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ ³1:ALL (.001) ³
³ ³2:ALL (.002) ³
³ ³3:ALL (.003) ³
³ ³4:ALL (.004) ³
³ ³4:902/26.3 (0386001a) Fernando Toledo ³
³ ³4:902/26.10 (0386001a) Fernando Toledo ³
³ ³4:902/26.5 (0386001a) Gateway ³
³ ³4:90/1 (005a0001) Momia BBS ³
³ ³21:2/100 (00020064) FSXNET Hub ³
³ ³21:ALL (.015) FSXNET NET ³
³ ³618:ALL (.26A) Micronet NET ³
³ |618:500/1 (01f40001) Micronet HUB ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

I already have a node setting to 4:90/1 to get packets for my actual
node (4:902/26)

Should i add another (duplicated) 4:90/1 settings to get the 4:900/xxxx
?? (will generate a new poll to my boos?)

When add a new node downlink (ej 4:900/100) the RouteTo settings have to
let it empty??

I paste my relevant settings of sbbsecho.ini


[node:1:ALL@fidonet]
Route = 4:90/1
LocalAddress = 4:902/26
[node:2:ALL@fidonet]
Route = 4:90/1
LocalAddress = 4:902/26
[node:3:ALL@fidonet]
Route = 4:90/1
LocalAddress = 4:902/26
[node:4:ALL@fidonet]
Route = 4:90/1
LocalAddress = 4:902/26
[node:4:902/26.3@fidonet]
Status = Hold
LocalAddress = 4:902/26
[node:4:902/26.10@fidonet]
Status = Hold
[node:4:902/26.5@fidonet]
Status = Hold
LocalAddress = 4:902/26
[node:4:90/1@fidonet]
Status = Normal
LocalAddress = 4:902/26
BinkpHost = momiabbs.no-ip.info
BinkpPort = 24554
BinkpPoll = true
[node:21:2/100@fsxnet]
Status = Normal
BinkpHost = error404bbs.ddns.net
BinkpPort = 24555
BinkpPoll = true
[node:21:ALL@fsxnet]
Status = Normal
Route = 21:2/100
[node:618:ALL@micronet]
Status = Normal
Route = 618:500/1
LocalAddress = 618:500/45
[node:618:500/1@micronet]
Status = Normal
LocalAddress = 618:500/45
BinkpHost = bbs.darkrealms.ca
BinkpPort = 24554
BinkpPoll = true
[domain:fidonet]
Zones = 1,2,3,4
DNSSuffix =
NodeList = /sbbs/fido/NODELIST.FIDO
[domain:fsxnet]
Zones = 21
DNSSuffix =
NodeList = /sbbs/fido/NODELIST.FSXNET
[domain:micronet]
Zones = 618
DNSSuffix =
OutboundRoot = /sbbs/fido/outbound
NodeList = /sbbs/fido/NODELIST.MICRONET


Sorry my english, and noob questions.. i want to learn and investigate
if are possible to get a complete routing system using synchronet binkit+sbbsecho or need external aplication to do this work.

Thanks!

---
þ Synchronet þ Dock Sud BBS TLD 24 HS - bbs.docksud.com.ar

Re: binkit routing questions
By: Ragnarok to DOVE-Net.Synchronet_Discussion on Fri Mar 13 2020 09:40 pm

Hi all!

I already have binkit configured as node for several nets. (fido, fsx, micronet, etc) this just work fine.

My fido node are 4:902/26 and also, for testing purpose, i have some
points as downlinks for my fidonet node (ex: 4:902/26.3, 4:902/26.5, etc)

This also works. I can add/remove areas from the "sbbsecho areafix" from these points and get these packets.

Now, i thinking on receive the 4:900 segment to get downlink
nodes/clients like 4:900/10, 4:900/11, etc. (I think that this setup
called "fidonet hub" mode)

My questing are:

Should I add the 4:900 on scfg->networks->fidonet->system addresses
or must be a node aka like 4:900/0 ?

It has to be a 3D or 4D address (so 4:900/0, not 4:900).

This is my actual linked nodes:

[ú][?]ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Linked Nodes ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ ³1:ALL (.001) ³
³ ³2:ALL (.002) ³
³ ³3:ALL (.003) ³
³ ³4:ALL (.004) ³
³ ³4:902/26.3 (0386001a) Fernando Toledo ³
³ ³4:902/26.10 (0386001a) Fernando Toledo ³
³ ³4:902/26.5 (0386001a) Gateway ³
³ ³4:90/1 (005a0001) Momia BBS ³
³ ³21:2/100 (00020064) FSXNET Hub ³
³ ³21:ALL (.015) FSXNET NET ³
³ ³618:ALL (.26A) Micronet NET ³
³ |618:500/1 (01f40001) Micronet HUB ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

I already have a node setting to 4:90/1 to get packets for my actual
node (4:902/26)

Should i add another (duplicated) 4:90/1 settings to get the 4:900/xxxx
?? (will generate a new poll to my boos?)

I don't understand the question.

When add a new node downlink (ej 4:900/100) the RouteTo settings have to
let it empty??

No, you could specify a route-to address if you want.


digital man

Synchronet/BBS Terminology Definition #40:
IMAP = Internet Message Access Protocol
Norco, CA WX: 51.8øF, 98.0% humidity, 0 mph S wind, 0.04 inches rain/24hrs

---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net