Rob, this has prob been asked and answered, but I can't find any reference to it, so I'll ask. When you log into your system, the first thing that you see is Inter-BBS Active Users:... What is this program. Is their a module I can activate to use this on my system. I've checked other sbbs systems, and yours appears to be the only one with this feature. Just Curious. Thanks.
Rob, this has prob been asked and answered, but I can't find any reference to it, so I'll ask. When you log into your system, the first thing that you see is Inter-BBS Active Users:... What is this program. Is their a module I can activate to use this on my system. I've checked other sbbs systems, and yours appears to be the only one with this feature. Just Curious. Thanks.
Rob, this has prob been asked and answered, but I can't find any reference to it, so I'll ask. When you log into your system, the first thing that you see is Inter-BBS Active Users:... What is this program. Is their a module I can activate to use this on my system. I've checked other sbbs systems, and yours appears to be the only one with this feature. Just Curious. Thanks.
Many SysOps have the module active ... that's why I disabled ActiveUser ports on my system ... the requests were constant and clogging my board almost as a DoS :-( ... my board runs much faster by blocking incoming ActiveUser requests
Rob, this has prob been asked and answered, but I can't find any
reference to it, so I'll ask. When you log into your system, the first
thing that you see is Inter-BBS Active Users:... What is this program.
Is their a module I can activate to use this on my system. I've
checked other sbbs systems, and yours appears to be the only one with
this feature. Just Curious. Thanks.
You're the first to ask. :-)
Many SysOps have the module active ... that's why I disabled ActiveUser ports on my system ... the requests were constant and clogging my board almost as a DoS :-( ... my board runs much faster by blocking incoming ActiveUser requests
Re: Re: Inter-BBS Active Users
By: Mortifis to DesotoFireflite on Wed Jan 30 2019 07:09 pm
Many SysOps have the module active ... that's why I disabled ActiveUser ports on my system ... the requests were constant and clogging my board almost as a DoS :-( ... my board runs much faster by blocking incoming ActiveUser requests
It's the same list that's on the chat menu, but with the ones that are online only, without the inactive systems. I don't think 3 or 4 systems will make any noticable difference in speed.
Execute on Event Logon, Only
Re: Inter-BBS Active Users
By: DesotoFireflite to Digital Man on Wed Jan 30 2019 02:21 pm
Rob, this has prob been asked and answered, but I can't find any reference to it, so I'll ask. When you log into your system, the first thing that you
see is Inter-BBS Active Users:... What is this program. Is their a module I
can activate to use this on my system. I've checked other sbbs systems, and
yours appears to be the only one with this feature. Just Curious. Thanks.
You're the first to ask. :-)
SCFG->External Programs->Online Programs->Main (or whereever):
Name Synchronet IMSG List
Internal Code SBBSIMSG
Start-up Directory
Command Line ?sbbsimsg -l
Clean-up Command Line
Execution Cost None
Access Requirements
Execution Requirements
Multiple Concurrent Users Yes
Intercept I/O No
Native Executable No
Use Shell to Execute No
Modify User Data No
Execute on Event Logon, Only
Pause After Execution No
BBS Drop File Type None
Place Drop File In Node Directory
digital man
Synchronet/BBS Terminology Definition #64:
Sysop = System Operator
---
Digital Man wrote to DesotoFireflite <=-
Re: Inter-BBS Active Users
By: DesotoFireflite to Digital Man on Wed Jan 30 2019 02:21 pm
Rob, this has prob been asked and answered, but I can't find any reference to it, so I'll ask. When you log into your system, the first thing that you see is Inter-BBS Active Users:... What is this program. Is their a module I can activate to use this on my system. I've checked other sbbs systems, and yours appears to be the only one with this feature. Just Curious. Thanks.
You're the first to ask. :-)
SCFG->External Programs->Online Programs->Main (or whereever):
Name Synchronet IMSG List
Internal Code SBBSIMSG
Start-up Directory
Command Line ?sbbsimsg -l
Clean-up Command Line
Execution Cost None
Access Requirements
Execution Requirements
Multiple Concurrent Users Yes
Intercept I/O No
Native Executable No
Use Shell to Execute No
Modify User Data No
Execute on Event Logon, Only
Pause After Execution No
BBS Drop File Type None
Place Drop File In Node Directory
Re: Re: Inter-BBS Active Users
By: Mortifis to DesotoFireflite on Wed Jan 30 2019 07:09 pm
Many SysOps have the module active ... that's why I disabled ActiveUser ports on my system ... the requests were constant and clogging my board almost as a DoS :-( ... my board runs much faster by blocking incoming ActiveUser requests
It's the same list that's on the chat menu, but with the ones that are online only, without the inactive systems. I don't think 3 or 4 systems will make any noticable difference in speed.
I can share my logs with you, I was getting ActiveUser-UDP requests every second
for 2 days ...
El 30/1/19 a las 19:47, Digital Man escribió:
Execute on Event Logon, Only
What is the difference selecting "Event Only" o not ?
El 30/1/19 a las 19:47, Digital Man escribió:
Re: Inter-BBS Active Users
By: DesotoFireflite to Digital Man on Wed Jan 30 2019 02:21 pm
Rob, this has prob been asked and answered, but I can't find any reference to it, so I'll ask. When you log into your system, the first thing that you
see is Inter-BBS Active Users:... What is this program. Is their a module I
can activate to use this on my system. I've checked other sbbs systems, and
yours appears to be the only one with this feature. Just Curious. Thanks.
You're the first to ask. :-)
SCFG->External Programs->Online Programs->Main (or whereever):
Name Synchronet IMSG List
Internal Code SBBSIMSG
Start-up Directory
Command Line ?sbbsimsg -l
Clean-up Command Line
Execution Cost None
Access Requirements
Execution Requirements
Multiple Concurrent Users Yes
Intercept I/O No
Native Executable No
Use Shell to Execute No
Modify User Data No
Execute on Event Logon, Only
Pause After Execution No
BBS Drop File Type None
Place Drop File In Node Directory
digital man
Synchronet/BBS Terminology Definition #64:
Sysop = System Operator
---
i have two events on logon postit and now the sbbsimgs
this do not have a crlf() bettwen both and get spapped
http://i.imgur.com/vLRVdzy.png
i think that someone need a crlf() maybe into the loop that load these
event must add it.
Digital Man wrote to DesotoFireflite <=-
Re: Inter-BBS Active Users
By: DesotoFireflite to Digital Man on Wed Jan 30 2019 02:21 pm
Rob, this has prob been asked and answered, but I can't find any reference to it, so I'll ask. When you log into your system, the first thing that you see is Inter-BBS Active Users:... What is this program. Is their a module I can activate to use this on my system. I've checked other sbbs systems, and yours appears to be the only one with this feature. Just Curious. Thanks.
You're the first to ask. :-)
SCFG->External Programs->Online Programs->Main (or whereever):
Name Synchronet IMSG List
Internal Code SBBSIMSG
Start-up Directory
Command Line ?sbbsimsg -l
Clean-up Command Line
Execution Cost None
Access Requirements
Execution Requirements
Multiple Concurrent Users Yes
Intercept I/O No
Native Executable No
Use Shell to Execute No
Modify User Data No
Execute on Event Logon, Only
Pause After Execution No
BBS Drop File Type None
Place Drop File In Node Directory
I just set that up but get this message:
!JavaScript /home/sbbs/sbbs/exec/sbbsimsg.js line 168: TypeError: sys is undefined
Not sure what I did wrong.
Many SysOps have the module active ... that's why I disabled
ActiveUser ports on my system ... the requests were constant and
clogging my board almost as a DoS :-( ... my board runs much faster
by blocking incoming ActiveUser requests
Many SysOps have the module active ... that's why I disabled ActiveUser
ports on my system ... the requests were constant and clogging my board
almost as a DoS :-( ... my board runs much faster by blocking incoming
ActiveUser requests
I seriously doubt it would make any noticeable difference.
On 2019 Jan 30 15:36:50, you wrote to Mortifis:
Many SysOps have the module active ... that's why I disabled ActiveUser
ports on my system ... the requests were constant and clogging my board
almost as a DoS :-( ... my board runs much faster by blocking incoming
ActiveUser requests
I seriously doubt it would make any noticeable difference.
i certainly don't see any different over here... more logged data is about the only thing...
Digital Man wrote to Thumper <=-
I just set that up but get this message:
!JavaScript /home/sbbs/sbbs/exec/sbbsimsg.js line 168: TypeError: sys is undefined
Not sure what I did wrong.
Sounds like you're running an old revision of sbbsimsg.js.
digital man
Re: Inter-BBS Active Users
By: DesotoFireflite to Digital Man on Wed Jan 30 2019 02:21 pm
Rob, this has prob been asked and answered, but I can't find any reference to it, so I'll ask. When you log into your system, the first thing that you
see is Inter-BBS Active Users:... What is this program. Is their a module I
can activate to use this on my system. I've checked other sbbs systems, and
yours appears to be the only one with this feature. Just Curious. Thanks.
You're the first to ask. :-)
El 30/1/19 a las 19:47, Digital Man escribió:
Re: Inter-BBS Active Users
By: DesotoFireflite to Digital Man on Wed Jan 30 2019 02:21 pm
Rob, this has prob been asked and answered, but I can't find any reference to it, so I'll ask. When you log into your system, the first thing that you
see is Inter-BBS Active Users:... What is this program. Is their a module I
can activate to use this on my system. I've checked other sbbs systems, and
yours appears to be the only one with this feature. Just Curious. Thanks.
You're the first to ask. :-)
can i stop the lgging for this service only?
i flood my log. =|
Feb 4 20:22:34 localhost sbbs[29822]: 2/4 20:22:34 srvc 0036
ActiveUser-UDP created client socket: 84
Command Line ?sbbsimsg -l
Play Trade Wars Between 10 Other BBS's On Valhalla's Trade Wars Game Server!
I have TW1002 how can I connect to the server that you using?
Re: Inter-BBS Active Users
By: Digital Man to DesotoFireflite on Wed Jan 30 2019 02:47 pm
When using the below command line, all I get is
Inter-BBS Active Users: with a spinning curser under it.
Command Line ?sbbsimsg -l
If I use ?sbbsimsg with no command line, it works fine, but
has the menu at the bottom to message or list or quit.
I'm using sbbsimsg.js with a file date of 2/9/2019. I also tried
the newer one you posted with the same results. What am I missing?
For how long? The default timeout is 2.5 seconds. At least after 2.5 seconds of no responses, it should exit back to whatever called it.
Maybe you just need a longer timeout. If you pass a number (of milliseconds) after the '-l' argument, it'll use that as a timeout value. For example, 'sbbsimsg -l 5000' would give you a 5 second poll timeout.
Also confirm you have the latest load/sbbsimsg_lib.js
Re: Inter-BBS Active Users
By: Digital Man to DesotoFireflite on Wed Feb 13 2019 06:00 pm
For how long? The default timeout is 2.5 seconds. At least after 2.5 seconds of no responses, it should exit back to whatever called it.
It does
Maybe you just need a longer timeout. If you pass a number (of milliseconds) after the '-l' argument, it'll use that as a timeout value. For example, 'sbbsimsg -l 5000' would give you a 5 second poll timeout.
I tried sbbsimsg -l 5000 and sbbsimsg -l 10000, and nothing different. even with the extended time, it acts quickly like the default 2.5.
Also confirm you have the latest load/sbbsimsg_lib.js
the file date is 2/9/2019
works like a charm with no arguments, but the minute I add the -l, I get nothing but the spinning curser. I'm prob missing something real stupid. sorry for the problems.
I tried sbbsimsg -l 5000 and sbbsimsg -l 10000, and nothing different.even
with the extended time, it acts quickly like the default 2.5.
Maybe you just need a longer timeout. If you pass a number (of
milliseconds) after the '-l' argument, it'll use that as a timeout
value. For example, 'sbbsimsg -l 5000' would give you a 5 second
poll timeout.
I tried sbbsimsg -l 5000 and sbbsimsg -l 10000, and nothing different.
even with the extended time, it acts quickly like the default 2.5.
That is weird. How exactly are you trying this? I was using the ;exec sysop command myself.
Also confirm you have the latest load/sbbsimsg_lib.js
the file date is 2/9/2019
The file date doesn't really tell me anything. What you need to do is use "cvs status" on the file or look at the $Id in the file and compare the revision number with what's current at cvs.synchro.net.
seemed to work fine... where/how are you trying to run it?
Re: Inter-BBS Active Users
By: Digital Man to DesotoFireflite on Thu Feb 14 2019 06:23 pm
Maybe you just need a longer timeout. If you pass a number (of
milliseconds) after the '-l' argument, it'll use that as a timeout DM>> value. For example, 'sbbsimsg -l 5000' would give you a 5 second DM>> poll timeout.
I tried sbbsimsg -l 5000 and sbbsimsg -l 10000, and nothing different.
even with the extended time, it acts quickly like the default 2.5.
That is weird. How exactly are you trying this? I was using the ;exec sysop command myself.
I put it in a login only external command. °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° É[þ][?]ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º Synchronet IMSG List º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º ³Name Synchronet IMSG List º
º ³Internal Code SBBSIMSG º
º ³Start-up Directory º
º ³Command Line ?sbbsimsg -L 60000 º
º ³Clean-up Command Line º
º ³Execution Cost None º
º ³Access Requirements º
º ³Execution Requirements º
º ³Multiple Concurrent Users Yes º
º ³Intercept I/O No º
º ³Native Executable No º
º ³Use Shell to Execute No º
º ³Modify User Data No º
º ³Execute on Event Logon, Only º
º ³Pause After Execution No º
º ³BBS Drop File Type None º
º³Place Drop File In Node Directory º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
I tried it today using the ;EXEC sysop command, and it worked, but I had to go to 30ms to get anything. I ramped up the external logon only up to 60ms, (60000), and still no results. so the module is working, just not under a logon only external.
Also confirm you have the latest load/sbbsimsg_lib.js
the file date is 2/9/2019
The file date doesn't really tell me anything. What you need to do is use "cvs status" on the file or look at the $Id in the file and compare the revision number with what's current at cvs.synchro.net.
// sbbsimsg_lib.js
// Synchronet inter-bbs instant message library
// $Id: sbbsimsg_lib.js,v 1.5 2019/01/30 23:30:52 rswindell Exp $
60000 would be 60 seconds (60000 milliseconds = 60 seconds).
Anyway, I don't have any explanation for any difference in behavior depending on when/how you run the module. It works on vert as a logon event. <shrug> Maybe try setting the "Execute on Event" to "Logon" (not "Logon, Only") and then see how it works from the external program menu.
Anyway, I don't have any explanation for any difference in behavior depending on when/how you run the module. It works on vert as a logon event. <shrug> Maybe try setting the "Execute on Event" to "Logon" (not "Logon, Only") and then see how it works from the external program menu.
| Sysop: | MCMLXXIX |
|---|---|
| Location: | Prospect, CT |
| Users: | 325 |
| Nodes: | 10 (0 / 10) |
| Uptime: | 06:14:13 |
| Calls: | 508 |
| Messages: | 219945 |
