I just got a copy of Telemate 4.20 running under DOSbox, and I'm wondering how I'm supposed to register it. I can probably find some old registration info online, but I can't tell where I'm supposed to enter it. Do I just wait until the evaluation period expires?

---
þ Synchronet þ electronic chicken bbs - bbs.electronicchicken.com

Re: Telemate 4.20 registration
By: ZeoNet to All on Thu Dec 04 2014 02:15 pm

I just got a copy of Telemate 4.20 running under DOSbox, and I'm wondering how I'm supposed to register it. I can probably find some old registration info online, but I can't tell where I'm supposed to enter it. Do I just
wait until the evaluation period expires?

i think you drop in a .key file
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

Re: Telemate 4.20 registration
By: ZeoNet to All on Thu Dec 04 2014 02:15 pm

I just got a copy of Telemate 4.20 running under DOSbox, and I'm wondering how I'm supposed to register it. I can probably find some old registration

http://www.filedropper.com/telemateregfile
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

Re: Telemate 4.20 registration
By: ZeoNet to All on Thu Dec 04 2014 02:15 pm

I just got a copy of Telemate 4.20 running under DOSbox, and I'm wondering how I'm supposed to register it. I can probably find some old registration info online, but I can't tell where I'm supposed to enter it. Do I just wait until the evaluation period expires?

I loved loved loved Telemate -- multitasking within a terminal program rocked.

---
þ Synchronet þ realitycheckBBS -- http://realitycheckBBS.org

Re: Telemate 4.20 registration
By: Poindexter Fortran to ZeoNet on Fri Dec 05 2014 08:43:37

I tried the keyfile - didn't work (probably because it was for 4.11, and I have 4.20). I looked up the TM.exe command line options, and it turns out that in order to enter your reg key, you have to run 'tm.exe /REGISTER'. So now my copy is registered to Batman.

I loved loved loved Telemate -- multitasking within a terminal program rocked.

This is my first time using it (or any DOS terminal program, for that matter - this was long before my time). I'm a full-time *nix user, so using terminal applications directly under Linux keeps me from seeing ANSI art and IBM characters - now that I can actually see it all, I never want to go back.

---
þ Synchronet þ electronic chicken bbs - bbs.electronicchicken.com

Re: Telemate 4.20 registration
By: ZeoNet to Poindexter Fortran on Fri Dec 05 2014 03:30 pm

Re: Telemate 4.20 registration
By: Poindexter Fortran to ZeoNet on Fri Dec 05 2014 08:43:37

I tried the keyfile - didn't work (probably because it was for 4.11, and I have 4.20). I looked up the TM.exe command line options, and it turns out that in order to enter your reg key, you have to run 'tm.exe /REGISTER'. So

yeah the keyfile i had was for 4.12
i dont think there's much of a difference between versions, though
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

Re: Telemate 4.20 registration
By: Mro to ZeoNet on Thu Dec 04 2014 09:11 pm

I just got a copy of Telemate 4.20 running under DOSbox, and I'm

wondering

how I'm supposed to register it. I can probably find some old

registration

http://www.filedropper.com/telemate420registered

^^ full tm 4.20 registered.

the reg scheme didnt change, but it's located in the .cfg file
for 4.20
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

Re: Telemate 4.20 registration
By: ZeoNet to All on Thu Dec 04 2014 14:15:47

I just got a copy of Telemate 4.20 running under DOSbox, and I'm wondering how I'm supposed to register it. I can probably find some old registration info online, but I can't tell where I'm supposed to enter it. Do I just wait until the evaluation period expires?

Well, I wish I could say I could answer your question, but I'm afraid that I can't. What I did want to chime in and say, though, was that that comm package kicked _ass_. At first I was running it on an 8088, so the massive scripts that I made couldn't keep up with the throughput sometimes, but when I upgraded, god I loved the capabilities of that program. Not to mention the fact that it supported multithreading in a DOS environment. That was beautiful, so long as you didn't shell out.

---
þ Synchronet þ Tinfoil Tetrahedron BBS telnet://tinfoil.synchro.net

Re: Telemate 4.20 registration
By: Khelair to ZeoNet on Fri Dec 05 2014 04:07 pm

when I upgraded, god I loved the capabilities of that program. Not to mention the fact that it supported multithreading in a DOS environment. That was beautiful, so long as you didn't shell out.

Back then, everything was text-based. I could use the Telemate text editor to write something while downloading. Qedit had a TSR version and I had an old version of Sidekick resident, so I could keep busy.

---
þ Synchronet þ realitycheckBBS -- http://realitycheckBBS.org

Re: Telemate 4.20 registration
By: ZeoNet to All on Thu Dec 04 2014 02:15 pm

I just got a copy of Telemate 4.20 running under DOSbox, and I'm wondering h I'm supposed to register it. I can probably find some old registration info online, but I can't tell where I'm supposed to enter it. Do I just wait unti the evaluation period expires?

I am a registered user of Telemate as I paid for it back in 1992 :)

To register Telemate, at the DOS box, type "TM /r" and this should bring up a request for your rego info.

Jeff

---
þ Synchronet þ Mordor - casper.homeip.net
þ Synchronet þ Vertrauen þ Home of Synchronet þ telnet://vert.synchro.net

Re: Telemate 4.20 registration
By: Mordor to ZeoNet on Fri Dec 19 2014 08:32:42

I just got a copy of Telemate 4.20 running under DOSbox, and I'm wonderin I'm supposed to register it. I can probably find some old registration in online, but I can't tell where I'm supposed to enter it. Do I just wait u the evaluation period expires?

I am a registered user of Telemate as I paid for it back in 1992 :)

To register Telemate, at the DOS box, type "TM /r" and this should bring up

God you guys are terrible. I'm so tempted to try to work a little bit harder on getting dosbox or dosemu working on this OpenBSD system now.
Maybe, just maybe, I could get it working along with one of those
telnet/dialer emulation pieces of software and REALLY relive the glory
days. It'd certainly be nice to put together some script to log in to all of the BBSes I like periodically, check their non-networked message bases, and maybe even ping some games I don't want to idle out on. ;) Though, all things considered, I guess I could do that in 'expect' script, also. That's proven tough to find a decent tutorial on, though.

---
þ Synchronet þ Tinfoil Tetrahedron BBS telnet://tinfoil.synchro.net

Re: Re: Telemate 4.20 registration
By: Khelair to Mordor on Fri Dec 19 2014 01:12 pm

God you guys are terrible. I'm so tempted to try to work a little bit harder on getting dosbox or dosemu working on this OpenBSD system now. Maybe, just maybe, I could get it working along with one of those telnet/dialer emulation pieces of software and REALLY relive the glory
days. It'd certainly be nice to put together some script to log in to all o the BBSes I like periodically, check their non-networked message bases, and maybe even ping some games I don't want to idle out on. ;) Though, all thi considered, I guess I could do that in 'expect' script, also. That's proven tough to find a decent tutorial on, though.

Unfortunatly, Telemate does not do Telnet as it was only a COMMS program through serial ports. I would love to get a serial to LAN converter somehow get Telemate to be able to "dial a URL"..

But, I am using Procomm Plus 4.8 for Windows to connect to BBS's these days.

Jeff in Australia.

---
þ Synchronet þ Mordor - casper.homeip.net
þ Synchronet þ Vertrauen þ Home of Synchronet þ telnet://vert.synchro.net

El 21/12/14 a las 07:33, Mordor escibió:

Re: Re: Telemate 4.20 registration
By: Khelair to Mordor on Fri Dec 19 2014 01:12 pm

God you guys are terrible. I'm so tempted to try to work a little bit harder on getting dosbox or dosemu working on this OpenBSD system now. Maybe, just maybe, I could get it working along with one of those telnet/dialer emulation pieces of software and REALLY relive the glory days. It'd certainly be nice to put together some script to log in to all o
the BBSes I like periodically, check their non-networked message bases, and
maybe even ping some games I don't want to idle out on. ;) Though, all thi
considered, I guess I could do that in 'expect' script, also. That's proven
tough to find a decent tutorial on, though.

Unfortunatly, Telemate does not do Telnet as it was only a COMMS program through serial ports. I would love to get a serial to LAN converter somehow get
Telemate to be able to "dial a URL"..

But, I am using Procomm Plus 4.8 for Windows to connect to BBS's these days.

Jeff in Australia.

if you run under dosbox you can dial a hostname like this:

atdt bbs.docksud.com.ar

---
þ Synchronet þ Dock Sud BBS TLD 24 HS - http://www.docksud.com.ar - telnet://bbs.docksud.com.ar

Re: Re: Telemate 4.20 registration
By: Ragnarok to Mordor on Sun Dec 21 2014 02:50 pm

if you run under dosbox you can dial a hostname like this:

atdt bbs.docksud.com.ar

I just tried that. But you still need a modem in order to return the command to the screen. With no modem, it returns nothing and therefore does not make a connection.

Jeff


---
þ Synchronet þ Mordor - casper.homeip.net
þ Synchronet þ Vertrauen þ Home of Synchronet þ telnet://vert.synchro.net

Re: Re: Telemate 4.20 registration
By: Ragnarok to Mordor on Sun Dec 21 2014 02:50 pm

if you run under dosbox you can dial a hostname like this:

atdt bbs.docksud.com.ar

I have never used DosBox before. So I had to go through some of the configurations of it and I am now using my good old Telemate to type this on my BBS, using DosBox.

Thanks for the tip. Guess I will be using this from now on :)

Jeff in Brisbane Australia.

---
þ Synchronet þ Mordor - casper.homeip.net
þ Synchronet þ Vertrauen þ Home of Synchronet þ telnet://vert.synchro.net

Mordor wrote to Ragnarok <=-

atdt bbs.docksud.com.ar

I just tried that. But you still need a modem in order to return the command to the screen. With no modem, it returns nothing and therefore does not make a connection.

If you look into the doxbox.conf file, there's a setting for each serial
port, and a way to tell it to "dial" over a specific IP port. Sorry I can't
be more specific, I don't have a copy available right now.

Once you do that, typing in ATDT hostname works.



... Remove ambiguities and convert to specifics
--- MultiMail/Win32 v0.50
þ Synchronet þ realitycheckBBS -- http://realitycheckBBS.org

Re: Re: Telemate 4.20 registration
By: Mordor to Ragnarok on Mon Dec 22 2014 11:14 pm

Re: Re: Telemate 4.20 registration
By: Ragnarok to Mordor on Sun Dec 21 2014 02:50 pm

if you run under dosbox you can dial a hostname like this:

atdt bbs.docksud.com.ar

I have never used DosBox before. So I had to go through some of the configurations of it and I am now using my good old Telemate to type this
on my BBS, using DosBox.

Thanks for the tip. Guess I will be using this from now on :)

Jeff in Brisbane Australia.

if you go on bbstorrents there's bbs termbox. there's a bunch of clients you can play with configured and launched with dosbox.
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

Re: Re: Telemate 4.20 registration
By: Poindexter Fortran to Mordor on Mon Dec 22 2014 09:56 am

If you look into the doxbox.conf file, there's a setting for each serial port, and a way to tell it to "dial" over a specific IP port. Sorry I can't be more specific, I don't have a copy available right now.

i'm pretty sure that's for incoming.
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

Re: Re: Telemate 4.20 registration
By: Mro to Poindexter Fortran on Mon Dec 22 2014 04:43 pm

i'm pretty sure that's for incoming.

Nope, that termbox installer on your site is already set to telnet out with legacy DOS serial comm apps.

---
þ Synchronet þ realitycheckBBS -- http://realitycheckBBS.org

Re: Re: Telemate 4.20 registration
By: Poindexter Fortran to Mro on Mon Dec 22 2014 05:20 pm

i'm pretty sure that's for incoming.

Nope, that termbox installer on your site is already set to telnet out with legacy DOS serial comm apps.

i thought those com settings are for incoming.
yeah i know termbox is set to telnet out. would suck if it wasnt :D
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

El 22/12/14 a las 09:14, Mordor escibió:

Re: Re: Telemate 4.20 registration
By: Ragnarok to Mordor on Sun Dec 21 2014 02:50 pm

if you run under dosbox you can dial a hostname like this:

atdt bbs.docksud.com.ar

I just tried that. But you still need a modem in order to return the command to
the screen. With no modem, it returns nothing and therefore does not make a connection.

Jeff

this is my [serial] section on my ~/.dosbox/dosbox-0.74.conf

[serial]
serial1=dummy
serial2=modem listenport:5000
serial3=modem listenport:5001
serial4=disabled


then i have a terminate 5 and telemate configured to use the modem on
com2, i can dial to hostname with this config.

---
þ Synchronet þ Dock Sud BBS TLD 24 HS - http://www.docksud.com.ar - telnet://bbs.docksud.com.ar

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

El 22/12/14 a las 19:43, Mro escibió:

Re: Re: Telemate 4.20 registration By: Poindexter Fortran to Mordor
on Mon Dec 22 2014 09:56 am

If you look into the doxbox.conf file, there's a setting for each
serial port, and a way to tell it to "dial" over a specific IP
port. Sorry I can't be more specific, I don't have a copy
available right now.

i'm pretty sure that's for incoming. --- � Synchronet � :::
BBSES.info - free BBS services :::

nope, outgoing connection also works

you can see this video: https://vid.me/VDB7
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iEYEARECAAYFAlSY5H8ACgkQrka4e4h7i+PGhQCg37MbE4X0b6K+yCNVItZTbQ27 PXAAn3M56N5RW0bwV3nxniKGF6a13eO5
=x+Sr
-----END PGP SIGNATURE-----

---
þ Synchronet þ Dock Sud BBS TLD 24 HS - http://www.docksud.com.ar - telnet://bbs.docksud.com.ar

Re: Re: Telemate 4.20 registration
By: Ragnarok to Mordor on Tue Dec 23 2014 12:30 am

this is my [serial] section on my ~/.dosbox/dosbox-0.74.conf

[serial]
serial1=dummy
serial2=modem listenport:5000
serial3=modem listenport:5001
serial4=disabled

is that there by default? i'm pretty sure i've telneted out of dosbox
without doing that.

but to get incomming i have edited those lines.
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

Re: Re: Telemate 4.20 registration
By: Ragnarok to Mro on Tue Dec 23 2014 12:41 am

i'm pretty sure that's for incoming. --- � Synchronet � :::

nope, outgoing connection also works

yeah i mean those settings are so it listens ... for incoming.
i'll have to install default dosbox and take a look.
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

Re: Re: Telemate 4.20 registration
By: Mordor to Khelair on Sun Dec 21 2014 08:33 pm

Unfortunatly, Telemate does not do Telnet as it was only a COMMS program through serial ports. I would love to get a serial to LAN converter somehow get Telemate to be able to "dial a URL"..

https://github.com/LeifBloomquist/BBSServer

There's a few programs out there that'll let you dial out to tcp-ip. I use apps like this to connect with my C64 or A800 to BBSs. I just ATDI (ipaddress) (port) and the PC acts as a translator.

---
þ Synchronet þ Shodan's Core - shodan.synchro.net:23 & :2323

Re: Re: Telemate 4.20 registration
By: Mordor to Ragnarok on Mon Dec 22 2014 10:14 pm

I just tried that. But you still need a modem in order to return the command to the screen. With no modem, it returns nothing and therefore does not make a connection.

Na, just gotta configure dosbox to take serial and redirect it to tcp-ip.

http://breakintochat.com/blog/2013/04/17/telnet-to-bbs-within-dosbox-emulator/

---
þ Synchronet þ Shodan's Core - shodan.synchro.net:23 & :2323

Re: Re: Telemate 4.20 registration
By: Mordor to Khelair on Sun Dec 21 2014 20:33:33

Unfortunatly, Telemate does not do Telnet as it was only a COMMS program through serial ports. I would love to get a serial to LAN converter somehow get Telemate to be able to "dial a URL"..

That's basically what people have done with DOSBox & things like NetSerial to emulate a COM port to get comm programs such as Telemate to work via telnet.

Nightfox

---
þ Synchronet þ Digital Distortion BBS - digitaldistortionbbs.com

Re: telemate 4.20 REGISTERED
By: Mro to All on Fri Dec 05 2014 21:08:14

http://www.filedropper.com/telemate420registered

^^ full tm 4.20 registered.

That link doesn't seem to work. It just redirects to the FileDropper home page (www.filedropper.com).

Nightfox

---
þ Synchronet þ Digital Distortion BBS - digitaldistortionbbs.com

Re: telemate 4.20 REGISTERED
By: Nightfox to Mro on Sun Dec 28 2014 11:53 am

Re: telemate 4.20 REGISTERED
By: Mro to All on Fri Dec 05 2014 21:08:14

http://www.filedropper.com/telemate420registered

^^ full tm 4.20 registered.

That link doesn't seem to work. It just redirects to the FileDropper home page (www.filedropper.com).

it expires after a short time. i uploaded it in the beginning of the month.
do you want me to re-upload it?
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

Re: telemate 4.20 REGISTERED
By: Mro to Nightfox on Sun Dec 28 2014 15:15:54

http://www.filedropper.com/telemate420registered

That link doesn't seem to work. It just redirects to the FileDropper
home page (www.filedropper.com).

it expires after a short time. i uploaded it in the beginning of the month. do you want me to re-upload it?

If you could, please. I wouldn't mind having a registered Telemate 4.20.

Nightfox

---
þ Synchronet þ Digital Distortion BBS - digitaldistortionbbs.com

Re: telemate 4.20 REGISTERED
By: Nightfox to Mro on Sun Dec 28 2014 02:03 pm

If you could, please. I wouldn't mind having a registered Telemate 4.20.

okay i put it on bbs torrents.
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

Re: telemate 4.20 REGISTERED
By: Mro to Nightfox on Sun Dec 28 2014 17:13:16

okay i put it on bbs torrents.

Thanks.
I downloaded the torrent and loaded it in my torrent software, but it's not moving. It seems there are no peers offering it.

Nightfox

---
þ Synchronet þ Digital Distortion BBS - digitaldistortionbbs.com

Re: telemate 4.20 REGISTERED
By: Nightfox to Mro on Sun Dec 28 2014 16:47:08

okay i put it on bbs torrents.

Thanks.
I downloaded the torrent and loaded it in my torrent software, but it's not moving. It seems there are no peers offering it.

I take that back. My download has completed. Thanks.

Nightfox

---
þ Synchronet þ Digital Distortion BBS - digitaldistortionbbs.com

Re: telemate 4.20 REGISTERED
By: Nightfox to Mro on Sun Dec 28 2014 04:47 pm

Re: telemate 4.20 REGISTERED
By: Mro to Nightfox on Sun Dec 28 2014 17:13:16

okay i put it on bbs torrents.

Thanks.
I downloaded the torrent and loaded it in my torrent software, but it's not moving. It seems there are no peers offering it.

there are 3 people that downloaded successfully (four total seeders)
+ server
+ a guy on utorrent 2200
+ a guy using transmission 2.81.

if you still have problems email me on the site and we can troubleshoot.
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

Re: telemate 4.20 REGISTERED
By: Nightfox to Mro on Sun Dec 28 2014 05:48 pm

Thanks.
I downloaded the torrent and loaded it in my torrent software, but
it's not moving. It seems there are no peers offering it.

I take that back. My download has completed. Thanks.

are you using transmission? i've noticed it does some weird stuff where it chokes off connections to other clients
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

Re: Telemate 4.20 registration
By: ZeoNet to All on Thu Dec 04 2014 02:15 pm

I just got a copy of Telemate 4.20 running under DOSbox, and I'm wondering h I'm supposed to register it. I can probably find some old registration info online, but I can't tell where I'm supposed to enter it. Do I just wait unti the evaluation period expires?

I just did a test in the hopes that back in the early 1990's registration codes were not that smart.

My paid for Telemate 4.21 registration code consists of TM followed by 9 digits. I attempted to register Telemate using my name and TM with a random 9 digit code. This did not work. So the code DOES somehow know what name it should be.

However, I remember seeing a Telemate Registration Code generator one tiime, wish I had kept that...

Jeff in Brisbane, Australia.

---
þ Synchronet þ Mordor - casper.homeip.net
þ Synchronet þ Vertrauen þ Home of Synchronet þ telnet://vert.synchro.net

Re: Telemate 4.20 registration
By: Mordor to ZeoNet on Mon Dec 29 2014 04:37 pm

digits. I attempted to register Telemate using my name and TM with a random 9 digit code. This did not work. So the code DOES somehow know what name it should be.

However, I remember seeing a Telemate Registration Code generator one
tiime, wish I had kept that...

I dont know why you thought using your name and a random 9 digit code would work.

if anything the code would work and it wouldnt care about your name.

but anyways, i used regit and registered telemate 4.21
---
þ Synchronet þ ::: BBSES.info - free BBS services :::

Re: Telemate 4.20 registration
By: Mro to Mordor on Mon Dec 29 2014 12:08 pm

I dont know why you thought using your name and a random 9 digit code would work.

if anything the code would work and it wouldnt care about your name.

but anyways, i used regit and registered telemate 4.21

I did it as a test. Just to see what would happen.

Enjoy your registered version.

Jeff

---
þ Synchronet þ Mordor - casper.homeip.net
þ Synchronet þ Vertrauen þ Home of Synchronet þ telnet://vert.synchro.net

Re: Re: Telemate 4.20 registration
By: Mordor to Khelair on Sun Dec 21 2014 20:33:33

though. Unfortunatly, Telemate does not do Telnet as it was only a COMMS program through serial ports. I would love to get a serial to LAN converter somehow get Telemate to be able to "dial a URL"..

As I'm sure has been mentioned since I've been on almost a month hiatus due to upgrade debauchery, there are pseudo-serial-port emulators that will allow you to send an ATDwhateversite.org in order to provide a full telnet/ssh-> dialup experience.

---
þ Synchronet þ Tinfoil Tetrahedron BBS telnet://tinfoil.synchro.net

Khelair wrote to Mordor <=-

@VIA: VERT/TINFOIL
@MSGID: <54BC719D.1797.dove-hlp@tinfoil.synchro.net>
@REPLY: <5496A1FD.1952.dove-hlp@192.168.1.3>
@TZ: 41e0
Re: Re: Telemate 4.20 registration
By: Mordor to Khelair on Sun Dec 21 2014 20:33:33

though. Unfortunatly, Telemate does not do Telnet as it was only a COMMS program through serial ports. I would love to get a serial to LAN converter somehow get Telemate to be able to "dial a URL"..

As I'm sure has been mentioned since I've been on almost a month
hiatus due to upgrade debauchery, there are pseudo-serial-port
emulators that will allow you to send an ATDwhateversite.org in order
to provide a full telnet/ssh-> dialup experience.

Just run it in DOSBox, it has a modem emulator where you can just dial a hostname / IP
address and it'll connect over TCP/IP.


... MultiMail, the new multi-platform, multi-format offline reader!
--- MultiMail/Darwin v0.49
þ Synchronet þ B4BBS = London, England - b4bbs.sampsa.com:2323 (telnet) or 2222 (ssh)

Re: Re: Telemate 4.20 registration
By: Khelair to Mordor on Sun Jan 18 2015 06:53 pm

As I'm sure has been mentioned since I've been on almost a month hiatus du to upgrade debauchery, there are pseudo-serial-port emulators that will allo you to send an ATDwhateversite.org in order to provide a full telnet/ssh-> dialup experience.

I am using DOSBox right now and my Telemate 4.21 to writew this. So for me, this works nicely. Except downloads don't work 99% of the time..

Jeff

---
þ Synchronet þ Mordor - casper.homeip.net

Re: Re: Telemate 4.20 registration
By: Jeff Friend to Khelair on Tue Jan 20 2015 07:16:09

I am using DOSBox right now and my Telemate 4.21 to writew this. So for me, this works nicely. Except downloads don't work 99% of the time..

My best guess would be to look at any pseudo-serial port flow control
options and start toggling for something like that...

---
þ Synchronet þ Tinfoil Tetrahedron BBS telnet://tinfoil.synchro.net

Re: Re: Telemate 4.20 registration
By: Khelair to Jeff Friend on Wed Jan 21 2015 11:35 am

My best guess would be to look at any pseudo-serial port flow control options and start toggling for something like that...

Hmm... In the DOS days, there was X00 and another fossil driver.. Might try one of those.

Jeff

---
þ Synchronet þ Mordor - casper.homeip.net

Re: Re: Telemate 4.20 registration
By: Jeff Friend to Khelair on Tue Jan 20 2015 07:16 am

I am using DOSBox right now and my Telemate 4.21 to writew this. So for me, this works nicely. Except downloads don't work 99% of the time..

What's your "serial port" speed set to? When I use DOSBox/Telix, I need to set the port speed to 38400. At 57600, I get a bunch of errors.

Are you using Zmodem? Ymodem might work if Zmodem doesn't.

---
þ Synchronet þ realitycheckBBS -- http://realitycheckBBS.org

Re: Re: Telemate 4.20 registration
By: Poindexter Fortran to Jeff Friend on Thu Jan 22 2015 09:16 am

What's your "serial port" speed set to? When I use DOSBox/Telix, I need to s the port speed to 38400. At 57600, I get a bunch of errors.

Are you using Zmodem? Ymodem might work if Zmodem doesn't.

I set my port speed to 115200N81 and I OBLY get errors on downloads (have not tried uploads). No errors on browsing BBSs, just on downloading.

In a way, it is OK, I also have Procomm Plus 4.8 for Windows and it uploads, downloads and browses just fine.

I use ZModem. I will try Y and the others..

Jeff

---
þ Synchronet þ Mordor - casper.homeip.net